Davey SpaQuip SP800 PCB

£224.99

Description

Davey SpaQuip SP800 PCB.

Davey Spa Quip Spa Power PCB – SP800.

This genuine replacement Spa Power SP800 circuit board is manufactured by Davey/Spa-Quip in Australia. Also used with SP800 Spa Power Hot Tub control systems. This will replace all previous models of the SP800 PCB such as SP800AU-20, SP800-20 & SP800-30.

PCB Specifications:
1. Pump – One speed or two speed + circulation pump if needed.
2. Pump – One speed only is Pump 1 is one speed with circulation pump.
3. Pump – N/A.
Circ Pump – Yes, optional.
Air Blower – Single speed or variable speed.
Ozone – Yes.
Heater – Yes.
Light – 12 Volt.

Compatible Topside Controls:
This PCB will work with Spa Power oval or rectangular SP800 topside control pads/panels.

Manufacturers Part Number:
Davey/Spa-Quip Part Code – Q846606-1

Commonly found in Spa Brands:
Very common PCB Found on spa brands such as Sapphire Spas, Monarch Spas, Roto Spas and others.

Additional Information:
This PCB should be fitted with any dip switch settings set to the same position as your faulty PCB. As well as they should be fitted by a qualified tradesman or competent person. As an incorrect installation will void the manufacturers warranty. All our PCB’s are fully factory tested prior to be sent out. Furthermore once unpacked and fitted these cannot be returned. All PCB’s are serial numbered and logged before being sent out.

Pin It on Pinterest

Share This