Balboa GS500Z PCB 55432 – 2kw Model

This is a genuine Balboa GS500Z PCB 55432 circuit board found fitted to Balboa GS series spa control packs with 2kW (not 3kw) heaters.

Spec:

1 Pump – 1 or 2 Speed + Circ Pump if required
Ozone – Yes
Heater – Yes 2kW
Light – 12 Volt
Sensors – 2x M7

This PCB is used with Balboa’s Duplex VL range of topside controls such as the VL200 or VL404.

All replacement Balboa PCB’s should be fitted with all the dip switch settings set to the same position as your faulty/original PCB. Also the board should be fitted by a qualified tradesman or competent person. Please note an incorrect installation will void Balboa’s manufacturer’s warranty. Furthermore once installed these cannot be returned, all Balboa PCB’s are fully tested before they are dispatched to customers.

For more Balboa Parts please see, https://leicesterhottubhire.co.uk/balboa-parts/

For the Balboa website please visit, http://www.balboawatergroup.com/